"To change a tire," For most people, is indeed a very humble thing. However, incorrect operation cars and people would cause unnecessary harm. I believe there are a lot of newcomers have encountered this kind of problem, Ignition Coil Pack do not know when to change tires do first, what to do and how to operate after the use of tools.
 
Then I will look you in detail riders, changing a tire basic operating procedures, as well as in the process of changing tires need to attract our attention.
 
Before changing a tire
 
Before changing the tire, replace the tires before the first car to be parked in a relatively safe, flat place. Then tighten the parking brake, gear placed in the parking gear and the ignition switch to "lock" position. Open the "double flash" triangular warning signs and placed in a place far enough away from the car. Note: The warning triangle how to place during the day when the city ring road in general warning signs should stand at 50 meters of the car where the highway will have to establish if it is in place after the car 150 meters (a distance of about 200 steps of adults ); if the distance is a black day in the city loop encounter vehicle problems, you need to set up warning signs in place after the car 100 meters, while in the high-speed road will have to set up the position in 250 meters (about 300 adults take steps ) The second is to check onboard jack and tool kit and spare tire, usually based on different models, the spare tire usually placed: beneath the trunk floor, hanging below the rear, fixed in the trunk door. SUV (area) models are mostly spare tire hanging on the rear door below or fixed in the trunk, and the implications of the paper models the spare tire is placed under the trunk floor.
 
Removing tires
 
After all preparations, you can begin to change tires first step: removing the tire. When removing want to change a tire should be noted, do not lift it up on the car, you should use a socket wrench set screws in accordance with the tires diagonal order to loosen jack. Then after the partial lifting jack the vehicle up. If the first lift up the car, you will find the point because there is no force can not unscrew the screws. Note that when removing the screws firmly fixed wheel direction: counterclockwise to loosen; clockwise to tighten. In addition, due to the fixed wheel screws very tight, so we can make use of body strength. After loosening the screws one by one, we can use the local jack up the vehicle up. When using the jack to note: both sides are placed underneath the jack slot, and be sure to put the jack in the slot, to avoid accidents. After the jack support from, will loosen the screws in order to easily unscrew, megane dci turbocharger after they could win the whole tire, which means that the tire removal completed successfully.