You have a car, there is no system for their car's sound is not perfect and scratching? There is no screaming right next to fellow "Roar" experience at high speeds? It is time for the car to be a sound project! This will make you hustle isolated, and noise to say goodbye.

Car sound products from the late 1980s, Ford Mustang Camber Plates is a group of car audio enthusiasts from the United States in order to better enjoy the fun car stereo developed, these products not only can reduce the process of moving the car noise, and You can upgrade the car audio sound pressure and sound. So the car noise was originally a true hedonist who love cars and the creation, the purpose is to allow more owners to get the perfect distillation of life, enjoying more wonderful driving pleasure.

There are many reasons to make noise, some people in order to upgrade their car stereo, some people are too much traffic noise. But for whatever reason, the owners, the market price is not cheap to make noise, especially to do the whole car noise, cost is cheap. Instead, DIY soundproofing is another matter, and in fact this way the owners not only save money, you can also obtain a DIY sense of accomplishment.

Soundproof function

1. Adoption of noise, vibration-damping material damping the sheet metal of the car and sealed, improve defect speaker installation environment, restore sound pressure and sound quality car audio.

2. Adoption of noise, vibration damping material and sound of the car were treated, automotive sheet metal structure-borne noise reduction, Camber Plates Mustang improving driving comfort.

Door construction noise

Here we are with the door construction noise, for example, teach your own hands for the car stickers soundproofing membrane.

STEP1: to drive the truck to a secure site, the pull to get started brake, turn off, in order to ensure safe operation.

STEP2: After the first outside the order of removal within interiors, the exposed work surface. The removed screws and snaps into a special sealed plastic bags and marked disassembly position, placed in designated locations. We must pay attention when removing demolition skills, not excessive force with brute force or damaged panels and paint. All snaps from the buckle to use special tools.

STEP3: Use Bo Youqing lotion will work surfaces thoroughly cleaned again, all the dirt, grease, water, rust, etc. must be cleaned. In dealing with difficult clearing attachments (plastic, glass fiber, etc.), try to use other special solvent first and then dissolved with a special blade will slowly eradicate attachments; or use a hot air gun after his torn uniform heating, must not be used in the station on fire or high-temperature heating, prohibit the use of corrosive solvents, to prevent damage to the paint and panel. Finally, with a clean rag and wipe clean work surface thoroughly. Handling attachments must pay attention to the strength and direction of the force, to prevent scratching the paint and scratched panel. After using detergent, close the lid must be timely, avoid cleaning agents volatile and knocked detergent bottles.

STEP4: soundproofing material can be first pressed into the mold on the work surface, then use scissors or a table knife to split it into the desired size and shape of the corresponding work surface, cut paper model can be the first, if necessary then the next material. When cutting, try to avoid excessive and repetitive cutting stitching.

STEP5: peel off the protective insulation material kraft paper and paste it onto the work surface. Large work surface, side kick protection kraft paper, paste side to the work surface, then use special roller compacting. When a bubble with a knife to pick open, the air pressure out, so that insulation material firmly attached to the work surface. Use scissors or a knife when cutting the work surface must be taken to avoid scratching the work surface and cut the line. Small material and scrap should be affixed to the inside intensity difference of the site, to further improve the noise reduction effect.

STEP6: the interiors as from the inside to the outside by replacing, in the installation process, all components must be installed according to AS back; Ford TD03L4 Turbocharger all have to tighten the screws and buckle and fasten to prevent secondary noise.